Mitsukawa Ltd. Edition 'Homare' Ryoba Saws

Mitsukawa Ltd. Edition 'Homare' Ryoba Saws
Brand: Mitsukawa
Product Code: D-MK-121-MULTI
Reward Points: 0
Availability: In Stock
Price: $191.90

Available Options

* Size:

   - OR -   

Item # D-MK-121-MULTI   

Recommended for cutting: General lumber (soft woods)

Type of blade: Ryoba (double-sided) with cross cut on one side, rip cut on the other side.

TPI: 210mm blade Cross cut:20, Rip cut:9

        240mm blade Cross cut:16, Rip cut:6

        270mm blade Cross cut:11, Rip cut:4

        295mm blade Cross cut:9, Rip cut:3

Replacement blade: Not Available

Handle type:Wood wrapped with cane

These limited edition handmade saws are only available from Hida Tool. Each saw was handmade by top class, government certified traditional blacksmith Mitsukawa Juntaro. Each saw has also been given a serial number which is etched into the blade.

The steel for these saws was partially shaped and set aside in 1990 by Mitsukawa Juntaro’s father, the second Mitsukawa. Even years after the initial forging, internal microstructures within the steel undergo subtle changes that improve the durability and integrity of the steel. After twenty years of rest, the saw teeth were hand cut, trued with a shakkiri hammer and sharpened by Mitsukawa Juntaro. Because of the limited quantities of special steel, there are only 100 saws available in each size. Own a piece of history and reserve your Mitsukawa ‘Homare’ saw today.

Blade Length 210mm, 240mm, 270mm, 295mm
Blacksmith's Name Mitsukawa, Juntaro

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Hida Tool & Hardware Co., Inc. © 2018